House Plan Drawings in Kerala: What You Need and Why
Most families building a home in Kerala start with one drawing: the floor plan. It shows the rooms, it fits on one sheet, and it's what everyone discusses at the dining table. But a floor plan alone can't get you a building permit, and it certainly can't build a house.
Between the first sketch and the first footing, a house needs a full set of drawings. Some are for the panchayat or municipality. Some are for the mason, the bar bender, the electrician and the plumber. When a set is incomplete, decisions get made on site by whoever happens to be there that day, and that is where most budget overruns and "we didn't plan for this" moments begin.
This guide explains each drawing in a typical residential set, who prepares it, and how to check that yours is complete.
The full drawing set at a glance
| Drawing | What it shows | Who needs it |
|---|---|---|
| Site plan | Plot boundary, house position, setbacks, access road, well, septic tank | Local body, you, the builder |
| Floor plans | Rooms, walls, doors, windows and dimensions for each floor | Everyone |
| Elevations | How each side of the house looks, with heights and openings | Local body, builder, you |
| Sections | A vertical cut through the house: floor levels, roof, stair, slab thickness | Local body, builder |
| Permit drawings | Plan, elevation, section and site plan to building-rule requirements | Panchayat, municipality or corporation |
| Working drawings | Fully dimensioned construction drawings, schedules and details | Builder and site supervisor |
| Structural drawings | Footings, columns, beams, slabs and reinforcement details | Builder, bar bender, structural engineer |
| Electrical layout | Every switch, socket, light, fan and AC point, plus circuits | Electrician |
| Plumbing and drainage | Water supply, drainage, rainwater and septic lines | Plumber |
| 3D views | The finished look of the exterior and key rooms | You, mainly for decisions |
Site plan
The site plan places the house on your plot. It shows the boundaries, the distance from the house to each boundary and to the road, the gate, the driveway, the well, the septic tank and soak pit, and the rainwater harvesting pit if one is required.
It sounds simple, but this is where many permit problems start. Kerala's building rules set minimum distances from the boundary and the road, limits on how much of the plot can be covered, and a floor area ratio. In Thrissur, many plots are narrow, sloping or next to paddy land, and a design that ignores those limits will come back from the local body. Getting the site plan right first saves redesigning later.
Floor plans, elevations and sections
These three describe the house itself.
- Floor plans show each level from above: walls, rooms, doors, windows, stairs and sizes.
- Elevations show the outside of the house from the front, back and sides, including heights, roof slopes and where each opening falls. Your front elevation is one of these.
- Sections cut through the house vertically. They show the plinth height, floor-to-ceiling heights, slab and roof levels, the staircase and sunshades.
Sections are the drawings families look at least and builders need most. Questions like "how high is the plinth above the road?" and "will water from the road flow into the courtyard during the monsoon?" are answered here.
Permit drawings
Permit drawings are a version of the above prepared specifically for approval. They must show what the building rules require, including areas, setbacks, heights, parking where required, and the site plan, and be signed by a qualified professional registered for that category of building.
Kerala has moved building permit applications online through the K-SMART system, and in 2025 the state widened the self-certified permit route for smaller homes. The size and height thresholds for that route have been revised more than once, so ask your designer at the start which route your house qualifies for and what inspections follow. Under either route, the drawings have to be accurate, because the house you build is checked against them.
Permit drawings are not construction drawings. A permit set has enough detail for approval, not enough to build from.
Working drawings
Working drawings are what your builder actually builds from. A good working set includes:
- Fully dimensioned floor plans, with wall thicknesses and centre-line dimensions
- A door and window schedule listing every opening, its size, sill height and material
- Enlarged details for toilets, the kitchen and the staircase
- Flooring layout and patterns, including level differences between rooms and outside
- Sunshade, parapet and roof details
- Details of special elements: a nadumuttam, a pergola, built-in seating, a pooja niche
When working drawings are missing, sizes get decided on site. A window ends up 15 cm lower than planned, a toilet door opens against the washbasin, or the kitchen counter clashes with a window sill. None of these are disasters on their own. Together, they are the difference between a house that was designed and a house that just happened.
Structural drawings
Structural drawings are prepared by a structural engineer, based on the architectural plans and the soil on your plot. They cover footing sizes and depths, columns, plinth beams, beams, slabs, the staircase and lintels, with the exact steel reinforcement for each.
Ask for a soil check before the footing design is finalised, especially on reclaimed land, near paddy fields or on laterite slopes, which are all common around Thrissur. And make sure the structural drawings match the latest architectural plan. A column moved by the architect but not by the engineer is a common and avoidable problem.
Electrical and plumbing drawings (MEP)
MEP stands for mechanical, electrical and plumbing. For a home, this mostly means two sets of drawings.
Electrical layout. Every light, fan, switch board, socket, AC point, TV point, data point, inverter line and solar connection, marked room by room, with the circuits and the main distribution board. Plan this with your furniture layout in front of you. A socket behind the wardrobe or a switch behind an open door is a daily annoyance for decades.
Plumbing and drainage. Water supply from the well or mains to the overhead tank and every outlet, hot water lines, waste and soil pipes, inspection chambers, the septic tank and soak pit, and rainwater down pipes. Toilet floor slopes and the position of the floor trap should be shown.
If you plan a modular kitchen, wardrobes or a TV wall, finalise those designs before the electrical and plumbing drawings are frozen. It's much cheaper to move a point on paper than to cut a finished wall. Our interior design cost guide explains why interiors planned early cost less.
3D views
3D exterior and interior views are for you, not the builder. They're the easiest way to decide on colours, materials, roof form and window sizes before anything is built. They aren't a substitute for working drawings. A beautiful render with no section or detail behind it is still just a picture.
How drafting is usually charged
Drafting and drawing services in Kerala are usually priced in one of three ways: a rate per square foot of built-up area, a fixed fee for a defined set, or as part of a full architectural or design-build service. Compare quotes by the list of drawings included, not by the headline rate. A cheap quote often means permit drawings only, which leaves the working, structural and MEP drawings to be sorted out later, usually on site. Our guide to architect fees in Thrissur covers the different fee models in more detail.
Checklist: is your drawing set complete?
Before construction starts, you should have:
- A site plan showing setbacks, well, septic tank and drainage
- Floor plans for every level, fully dimensioned
- All four elevations
- At least two sections, one through the staircase
- Approved permit drawings and the permit itself
- A door and window schedule
- Toilet, kitchen and staircase details
- Structural drawings signed by the engineer
- Electrical layout with every point marked
- Plumbing, drainage and rainwater layout
If more than two of these are missing, decisions that should be made on paper will be made on site.
Getting your drawings done in Thrissur
At Design Draft, our architects, engineers and draughtsmen prepare the complete drawing set in-house, from the site plan and permit drawings to working, structural and MEP drawings. Because our own team also builds from them, the drawings are made to be used on site, not just approved.
If you're planning a house in Irinjalakuda, Chalakudy, Kodungallur or anywhere in Thrissur district, bring your plot details or any plan you already have. Book a free consultation, call +91 7736885666, or see our architectural services in Thrissur.
Frequently Asked Questions
What drawings are needed to build a house in Kerala?
A complete residential set includes a site plan, floor plans, elevations and sections, permit drawings for the local body, working drawings with door and window schedules and details, structural drawings from an engineer, and electrical and plumbing layouts. Permit drawings alone are not enough to build from.
What is the difference between permit drawings and working drawings?
Permit drawings show what the building rules require for approval, such as areas, setbacks and heights. Working drawings are the fully dimensioned construction set the builder uses, with schedules, enlarged details and level information. A house built from permit drawings alone leaves many decisions to be made on site.
Who prepares structural drawings for a house?
A structural engineer prepares them, based on the architectural plans and the soil conditions on your plot. They specify footing sizes, columns, beams, slabs and the steel reinforcement for each element.
What are MEP drawings for a house?
MEP stands for mechanical, electrical and plumbing. For a home, it mainly means the electrical layout showing every light, switch, socket and AC point, and the plumbing and drainage layout covering water supply, waste lines, rainwater, septic tank and soak pit.
How are drafting services charged in Kerala?
Usually as a rate per square foot of built-up area, a fixed fee for a defined drawing set, or as part of a full architectural or design-build service. Compare quotes by the list of drawings included rather than the headline rate.